Surface Pro Type Cover with Pen
96

6 other ways to attach the Surface Pen to the Surface Pro 3

When we got our hands on the new Surface Pro 3 yesterday, Microsoft has already attached the Surface Pen to the new Type Cover. While it does a great job at securing the Pen, we’re not completely happy with the way it looks. Check out some of the other ways you can attach the Surface Pen to the Surface Pro 3. Head past the break to watch the video.

1. There’s space between the new magnetic strip and the keyboard on the Surface Pro Type Cover. You can use that to clip on the Pen.

2. If you’re not using the Type Cover, you can attach the Pen to the right side of the Surface Pro 3. The magnets for the AC connecter is in this general area to pull in the Pen.

3. If you’re holding the Surface Pro 3 in portrait mode, you can attach the Surface Pen on top of the left side. The magnets for the Type Cover are in this area to pull in the Pen.

4. Same as number 3, but at the bottom.

5. These next two ways are very impractical, but some of you may want to know about them anyway. If you’re holding it in portrait mode, you can attach the Surface Pen towards the top left corner of the display. There’s a magnet here for the stabilizing strip on the Type Cover.

6. Same as number 5, but towards the bottom.

I’ve already decided to take off the flap for the Surface Pen the new Type Cover. Do you think you’ll do the same when you buy the Surface Pro 3? Let us know in the comments!

Further reading

1
loading...
66
loading...
40
loading...
0
loading...

Comments

There are 96 comments. Sign in to comment

Yup, I checked...it's real.

Mayur says:

Thanks Dan :)

efektos says:

Daniel, don't you think that it's about time you guys move to posting full-HD videos with 1080p? I mean, 720p is SO 2012... :)

Arda Ozkal says:

1080 is so 2013, publish 4k videos lol

While I kind of agree, uploading - and more specifically, YouTube processing - 1080P videos is a very long process. This is even worse when doing events and the internet is terrible. Now, Mark and I both have FiOS, but it can take 20-30 minutes sometimes for an upload, then you have to wait another 30-45 minutes sometimes for it to 'process'. Just saying, it's very time consuming ;)

Understandable, but how many of us see these videos within 30-45 minutes of you posting them?

Does it have sd card slot

Acbuono5 says:

I think you meant to say they need to really make a Surface DS = Courier.

MyNokiaMS says:

I think he meant to say they should make Surface Zune HD.   Now that we have ipad/macbook air killer(Surface pro3), time to make ipod killer.  :)

twint7787 says:

The iPod is dead. We sony need to kill it.

psykojello says:

people still have iPods? why?

p.nonnekens says:

Because where else am I gonna put 130GB of music, ready to take with me whenever I want. iPod Classic is still as awwesome as it was.

Toshiba made one years ago. Toshiba W100

jammyj77 says:

And tomorrow.....6 ways to watch paint dry!!

Nope, it's silly comment roundup day tomorrow ;)

jammyj77 says:

I'll be there ;-)

SargeT says:

More than a year with wpc and only just now paid special attention to how elegant and stylish wpc intro-outro-logo sequence is. Who gets the credits for the work?

Developed in house by our graphics teams ;)

TechFreak1 says:

Interesting, Sam mentioned a few articles ago there was an additional pen loop for sale. Wondering if you guys will put together a mini article about the accessories?
Edit: Good to know that flimsy and unsightly flap is only attached by an adhesive, was afraid it was completely woven in to the keyboard. This way we can move the flap if needed to a more appropriate or comfortable position.

Thanks for the article.  I found this useful. 

Now I just need to get myself a new Surface.

Hahaha! So do I ;)

MyNokiaMS says:

i would be leary about the first option. i wouldnt want the pen to scratch the screen when the pen is inserted like that, as the pressure when in a bag, or cover sliding back and forth from holding/hitting.

Possibly, though with Gorilla Glass and that clip is rubberized, not sure I'd be too concerned.

eddlang says:

Well, there is a groove where pen's pin slides into. I don't think it'll be much of an issue.

MyNokiaMS says:

The groove is on the outside. I was talking about the inside, where the pen's pin slides into.  That will rub against the screen.

Hoekie says:

Looks to me there's also a groove on the inside.

eddlang says:

I said where the pin slides into; on the inside. Hoekie got it.

Pause the video at 2:05 and you'll see.

MyNokiaMS says:

nah, if you look at .16(when he flips over the cover), and the mag strip stick against the screen.  that is what im talking about.

eddlang says:

Where's .16?

Ok, I’m assuming you saw the groove on the inside.

http://i.imgur.com/TimJAVK.png

Yes, the pin might be in contact with the display, but it doesn't seem to stick out enough to really damage the display. It's like as if those grooves on the inside and out were meant for the pen.

Perhaps Mark or Daniel could do some measuring and see how much the pin sticks out of the groove.

MyNokiaMS says:

Yes, I did see the groove on the inside.  But as you can see from my picture.

[Imgur](http://i.imgur.com/cfafbSU.jpg?1)

When the mag strip attached to the screen, as you can see from the photo.  It's not a major deal, but I just want to point that out.  That's all!

eddlang says:

I think it wouldn't be possible to flip it with the strip attached if the pen is inside the groove, since it sits right where it folds.

You'd have to remove the pen, or flip the cover completely by detaching the strip.

Denegar says:

You'd have the same Surface long enough to care? Strange. I thought everyone here bought the new model each year. :P

nicolaselmir says:

If I want a surface I get the 3pro or the mini :p

ErR0rPr0n3 says:

Options are good.... I want one now but my SP1 fits most of my needs still. I do like the sp3 look and size of the SP3 along with the weight reduction and increased power.  The new keyboard, the continual improvement in design (like that kickstand), there are a lot of good reasons to get the sp3 I just can't justify sidelining my sp1 and there's noone I'd give it to in order to make room for the new hotness (I'm still trying to find a way to justify it, I have a few weeks).

TechFreak1 says:

The more I read into the more I am so tempted to pre-order but that would leave me extremely broke and way deep into the red zone.. I wonder if there is a finance option lol.

Thank you so much for showing this... I was hoping that loop wasnt permanent.  I think I'll end up usng the spot you suggested... Thanks again

Broomcorn says:

Ahh! I never thought pen storage would be such a hurdle! Pasting on a flap to the keyboard is not the answer...

Rishicash says:

Indeed it isn't and especially at that price. The keyboard is beautiful but with the pen holder, it is like a beautiful vase with a sizable chip on the rim. 

stephking92 says:

Or a beautiful vase with a mug handle on the side.

Rishicash says:

Better yet!

 

TechFreak1 says:

At least now we can move that flap somewhere else or get rid of it entirely.

fraztto says:

Magnets, magnets everywhere

Ashhar Hasan says:

Sp 3, sp 3 everywhere!

erasure25 says:

Makes the SP1 & 2 pen storage look revolutionary! Lol.

spcdog says:

Definitely going to remove the pen holder loop from my type cover. It looks ao awful, like a tag sticking up from the back of someone's shirt. I wish they'd have put a little more thought into how to store the pen, because what's there now looks more like an afterthought and detracts from the otherwise top-notch industrial design. Steve Jobs would have fired someone if they tried to ship something like that. :)

Steve Jobs would not have had to worry about it because they do not support pen impute.

majohnny says:

Doesn't your preferred option scratch the screen?

Mark Guim says:

the clip isn't touching the screen because the keyboard and strip are raised.

majohnny says:

Good to know, thanks for your answer. Thats a great solution than.

sd173 says:

I wonder if the pen was designed to attach and fit like that (having it slide into the cover)

It is. If I remember correctly, Panos showed it too.

Adam Tiley says:

This was one of my questions about this surface!
The 1st gen was impractical because it forced you to use the AC magnet..

HoosierDaddy says:

I actually didn't read this article (or the one titled "5 other ways...."). But am lookig forward to reading the "8 other ways...." article when its published. ;)

Wevenhuis says:

wow, many options!

But Mark, is it about looking good or being safer and more functional?

WPC when r u gonna review surface pro 3???

TechFreak1 says:

Give them time... you can't just publish a detailed review after using it for a few hours (presuming that they do sleep :P)

dsdmarin says:

Not seeing comments on SP2

ahumeniy says:

I don't mind the flap. It reminds me of my Wacom bamboo tablet.

SwimSwim says:

More pics of each option, please?

TechFreak1 says:

I presume you haven't watched the video? :P

SwimSwim says:

Using the app, so didn't see it. My bad.

sdreamer says:

Is the pen loop loose enough to get the previous generations' styluses in? If you look around pen loops like that are pretty expensive (unless you have a Container store nearby) they go for like 8$ on Amazon, so 5$ is pretty decent (but I've heard its like 2-3$ in store at Container stores). I definately wouldn't mind using it for my SP. The clip on the previous stylus can get bent out and become loose.

JTDraper says:

#7) Shirt pocket.

jhornberger says:

#8) Behind ear.

Sin Ogaris says:

#9) behind pretty girl's ear.

WAHOO MAGIC!

I have a Surface RT. I am using it because of onenote. It is a powerfull note app. I use it for web search with explorer share. Explorer become better and better. Pen is a key for me rightnow. I will buy it when it will avaible in Germany... Thank for the video...

mswindows101 says:

So without a type cover you're kinda screwed? lol I'd go with option number one. It would be cool if Microsoft would have intentionally made the purpose of the magnets to be used for the pen,in addition to the keyboard use.

i_says says:

you can stick the little loop anywhere, including the device itself. it just looks shitty there.

Best place to store a pen? Your pocket.

onysi says:

He could've saved time by telling us that the flap is jjustt a sticky we can put elsewhere.

Mark Richey says:

Where's the cup holder?

newVariable says:

Please tell us is it a Wacom pen like Daniel said on that other video or is it a N-Trig pen ?

i_says says:

tech radar, engadget, reddit, techcrunch all say n-trig

newVariable says:

But Daniel says it is a Wacom in this video http://www.youtube.com/watch?v=aEGNVsyJfdc

stephking92 says:

Daniel is human too.

Meddleking says:

I think this may be where you want to look for the answer:  http://www.n-trig.com/Content.aspx?Page=Windows8.  Credit to someone who found it recently

I guess you could duct tape it.. So really 6 other ways minus the 5 that make little sense equals 1 practical way to secure your pen to the Surface pro 3. Thanks Surface team. Who I am sure reading this article with a wtf look on their faces.

i_says says:

all of those ways sucked.
even the offical way sucked.

I'm guessing that they don't really care about the pen that much, since there is no good way to attach it to the device itself, and they're reducing the pressure resolution (important for artists).

all they needed was a little slot where you could insert the clip of the pen.

Ken Heslip says:

This could be an opportunity for an accessory maker though.....

Imagine a plastic tube you can snap in to the usb port.

How could they not fix the pen-issue? That ugly thing at the keyboard is a design-desaster. Microsoft seems to have a kickstand-division but no manpower for this really annoying problem. Having the price of a single pen to replace it in mind one could assume they did it on purpose ;-)

textomatic says:

I actually laughed when you pulled that flap off!  Too funny!

Can't believe I just watched that... What about a Velcro sticky pad on the pen and one on the bezel of the tablet?

andy_hoffman says:

Really great video. Would watch again. Can you make a video about how to hold the pen too?

amd lover says:

I've got one, put it in your shirt pocket

#1 is my favorite.

bosha says:

I am sure if this new Surface and this pen was made by Apple they would find a better way to keep that pen in place. Like they would find some space inside of the tablet for compartment where you can simply insert that pen. It is called tablet pen compartment, not some flimsy pen flap..

zr2s10 says:

For how much this thing costs, you would think they could've made a pen slot built into the tablet.  My Galaxy Note 10.1 has that.  Of course, the pen isn't as nice...

dbcontext says:

Phewwww glad to know that the ugly flap can be removed. It's the first thing I'll do when I get my hands on the surface Pro 3.

pr0phecy says:

Hey Mark, I want that flap for my SP2, could you send it to me please? :P

retyler says:

I plan to remove the flap for the Surface Pen.

I purchased mine at  Best Buy near me and got the Navy Blue Best Buy edition. Mine did not come with the little flap on the keyboard to hold the pen beware.

I got the navy blue one too---no pen loop..  On my SP2 I added a pen loop that I got from Amazon.  They look to be of better quality than  the one in the video.

http://www.amazon.com/gp/aw/d/B002RNRYN4?cache=23bcf5e8f02f8b302e711293b...

 

Now that I've got the Surface pro 3, I am giving my surface pro 2 to my daughter.  She has 3 children so I expect the pen will soon be lost.  I'm going to look for some sort of lanyard to attach the pen before I give it to her. 

 

This was helpful. Thanks!