You decide

Which is better: Lumia 1020 or Lumia 930?

Lumia Cyan Updates!

AT&T Nokia Lumia 1020 getting Lumia Cyan update

Lumia Cyan Updates!

Lumia Cyan going out to Lumia 520, 920 and 1020 users

Lumia Cyan Updates!

Lumia 1020 Cyan update now available in more countries

More 1020 on Cyan

Lumia 1020 Cyan updates expand

Lumia Cyan for UK 1020

Cyan rolls out for UK Lumia 1020

Lumia Cyan Updates!

Lumia 1020 is going Cyan

Windows Phones

Cyan for Lumia 1020 rolls out in Canada

Windows Phone News

Unlocked Nokia Lumia 1020 now available from the Microsoft Store, supports LTE on T-Mobile

Windows Phones

Microsoft's latest video shows off the Nokia Lumia 1020 with OneDrive and Instagram


Lumia 1020 new 'end of life date' and what it all means for Microsoft

Windows Phone News

Lumia 1020 could hit End of Life status this September

Windows Phone News

This $300 case will let the Nokia Lumia 1020 go to the bottom of the sea

Windows Phone News

Lumia 630 performance benchmarks rival older Lumia 1020

Windows Phone News

Take your Lumia 1020 underwater like Cousteau with this $299 Watershot case

General News

Check out this custom underwater housing for the Lumia 1020 and Fabien Cousteau

Windows Phone News

Filmmaker works with the Lumia 1020 to produce beautiful effects using still shots

Windows Phone News

Buy a new Lumia and get a $25 Windows Phone Store gift card along with 9 free Gameloft games

Windows Phone News

DxO Optics Pro now supports the Nokia Lumia 1020


Win a Lumia 1020 for listing your favorite apps with AdDuplex


ProClip releases charging holders for both the Lumia 1020 and Lumia 928, your next road trip is going to be awesome

ProClip USA

Your Windows Phone devices comes with some pretty stellar options for car navigation software. If you’re in the Lumia family you’re rocking out with Nokia Drive, otherwise you’ve got solid options which you can read in our recent roundup of navigation apps for Windows Phone. But what do you use to keep your phone locked and secure in your car? We’re been big fans of ProClip for a long time. So we’re super stoked they now carry phone holders for both the Lumia 928 and Lumia 1020.

ProClip USA Lumia 1020

For both the Lumia 928 and Lumia 1020 you’re going to get three custom holders for your phone of choice. You have just the holder that comes with tilt swivel, but you’ll need to supply your own power source. There’s also a holder with a charging cord that you plug into your cigarette lighter. The final option is the holder with the ability to charge through hard wiring it to your car.

We’ve used the charging holder with title swivel and cigarette plug for both our Lumia 920 and HTC 8x and loved them both. We’re placing orders for the Lumia 1020 tonight. What’s great about going the ProClip route is you get a custom holder for both your phone and car. After selecting your phone model you input your car model to get various options for mounting. ProClip does ship globally, check the details on their site for more information. 

Interested in picking up a holder for your phone? Sound off below.

Source: ProClip USA Lumia 928 / Lumia 1020



There are 66 comments. Sign in to comment

Pretty sweet! Thanks for the article Sammie! Now you should get some sleep, it's 11:30 here!

sumothong01 says:

Been looking for a decent dock/charger for my 928. This might just be the ticket.

Sam Sabri says:

Super happy with mine. 

Darren Walsh says:

7.30 here, work time!! Am deffo getting the 1020 for Christmas, keep my 920 for a back up

Dave Bhullar says:

Just ordered the CR-200 so I won't need this :D

Selfie13 says:

Why is there not a 920 option, or am I overlooking something?

VelikiZliVuk says:

920 one came out earlier, I think. Check the links.

K_lando says:

go to their site.... they have an enormous list of phones they make holders for

Yeah, they make one for the 920.  I have one and it's great.

robinthekid says:

I just want to be able to film me driving with a clip. With such a beautiful camera on my 1020. I would love to film driving without having to hold the phone.

Guakala says:

Better yet if that is your goal... Grab a camera grip for the 1020 and buy a cheap suction cup camera mount off of eBay or other Chinese gadget sites like and FocalPrice. I got one from DX for about $5 I believe to use with my Kodak PlaySport while driving.

hiko36 says:

I had problems recording video while on my vacation a few months ago. With the phone in my car holder, it would pick up vibration from the road and cause ripples in the video. I assumed that was because the lens is suspended in a liquid but hopefully someone knows what I did wrong.

twelvetudors says:

Erghh. I just got a car mount for my 1020 and cable clips to more conveniently place the charging cable. Problem with this is, it's rather expensive, I don't really know how well it'll fit the vent on my car, and it doesn't look like it'll fit my phone with the yesoo case I got.

bat400 says:

Biggest problem is that you have to remove any case to put it in this holder...

Sam Sabri says:

Your beautiful phone shouldn't be in a case to begin with :P

HaibaneReki says:

exactly my point :) I solved my "car holder problem" with the universal CLINGO holder and a soft-case permanently attached to it :)

jpburr says:

Sucks if you have a wireless charging cover though

Paul Acevedo says:

Sure, just drop it and break it. :P

hung0820 says:

Proclip have the adjustable holder, so u don't need to remove your case cover

woodbane says:


PolishHitta says:

Still prefer the wireless Nokia car charger for that $89

I'm on my second CR-200 you have to be very careful with it. The gears inside the holding mechanism are very fragile plastic. I LOVE it though. A very good charger/dock/mount.

Skelnik says:

Agreed, if the gear can be replaced with a metal gear, it would be perfect.

bozza72 says:

will that thing hold a 920 ??

Sam Sabri says:

They have one for the 920, check the site. 

v_emman says:

I had a ProClip holder like that for a PDA that I was using for navigation some years ago. It was great, it fitted the PDA and the car perfectly (there are two parts that you screw together, one for your device and one for your car), but it had a problem. Because of the tight fit and the plastic material of the holder, it was scratching the PDA on the sides. Not a big deal for a device that I was using only in the car, but I wouldn't risk to put my 1020 in anything like it.

ra535i says:

I purchased and installed the hardwire version of the 1020 cradle and my phone is white.  After getting it all set up I dropped my phone in it for the first time and it was a bit of a tight fit.  When i pulled the phone out there was some black marring on the sides of my phone.  I freaked out at first but all i had to do was wipe it away thx to our matte finish.  Then after placing it back into the dock 1 or 2 mor times and wiping my phone down there was no more marring and the phone has a PERFECT fit that slides directly onto the micro usb charger.  
Couldn't be happier.  Recommended for everyone.  And by the way, if you upgrade your device all you have to do is replace the cradle, no need to buy a new mount.  It's here that you can save money and definitley installation time.  

v_emman says:

Thanks for the info. I would like to have it for the 1020 but I am still concerned about the scratches. My PDA is heavily scratched in the lower part of its sides. I am sure the scratches haven't developed in the first week or month, but after repeated use. I am happy that the black markings on your 1020 went away so easily, but to be sure that the holder does not scratch your phone you should use it for some months. I wish you the best.

Josh Harman says:

Some of these look like over priced crap.

A universal holder for $40? They're like $5 at most gas stations.

Sam Sabri says:

Unlike those gas stations mounts, these are solidly built and use a specific type of plastic. Forget which one, but it's freaking tough. 

Maybe so, but I got an iPhone mount from Monoprice for around $8.  The thing worked flawless, and it was as durable as it needed to be.  With these, by the time you buy a mount and holder, you are at $65 minimum.  That's pretty outrageous as far as I am concerned.

shehaal says:

Would be more interested if my 920 could actually charge while using Nokia Drive. Great app, but useless on long trips.

wize72 says:

Nokia CR-200 is the solution for that. I've been using with my 925 and it works like a charm

Bruno H says:

No inductive charging... No deal!

Paul Acevedo says:

Nobody asked ya to make a deal.

Sponge920 says:

Of course they did. The manufacturer/retailer did. They make a product, set a price and advertise it for sale. It's an invitation to buy, exchange cash for a product, i.e. a deal.

ScubaNitrox says:

Can any of these holders be used horizontally? I always see them being used vertically and not horizontally.

Sam Sabri says:

These rotate, so you can spin it any direction you like!

meathead88 says:

Yeah! An accessory for my 928!!!

danjer says:

Proclip makes good quality custom fit holders bur they are not cheap. The trouble is with Nokia. They want to sell you an overpriced cover to do wireless charging. With the cover nothing fits the phone anymore (holders, soft covers etc). By the time you replace them all you paid twice the price of the phone. Are they careless or is it an intentional ripoff?

NarcoSleepy says:

Whatever happened to the wireless chargers they were going to make for the 920?  Been waiting to throw my money at ProClip...

What an ugly stand for such a pretty device... shame! 

The 928's USB port is on the top.
You'd have to mount the phone upside down.

StevePT says:

Go to the website and look at the one for the 928. The USB port is correctly oriented in the cradle (on the top). The picture in the article is of the 1020, which has the USB port on the bottom.

motosada says:

Man, I could've used one of these a few weeks ago!!

BKsInBarre says:

They had me until I saw that you had to use self tapping screws...not screwing anything to my dashboard. :-(

MethodGT says:

For my car there were no screws involved at all. It fits into a crevice next to the radio. I love it.

tadnishida says:

With Pro Clips you have to buy 2 parts.  One part is custom fitted for the car you use and the other part is custom fitted for the device. The screws attached the phone mount to the car base.  They also make slide adapters if you have several devices (for more money of course).

Sponge920 says:

You don't screw anything into your dash. The mount clips into the dash at various locations (you choose from the available options). Then the clip screws into the mount.
It's all explained on their website.

Jazmac says:

Would be great on the 925 if not for the decision to put the charging port on top.

soaringthor says:

The 928's USB port is on top too. Check out their site to see a pic with the 928 in the holder, I'm pleased with how it looks. I thought it would be more bulky up top, but it's fine. I'm sure they'd do similar for a 925.

Jazmac says:

Heyyy, your're right. Its not bad. Not bad at all.

RonV42 says:

Actually they listed the 925 on their site also.  So you can charge.  In reguards to wireless charging I posted ProClips's reponse here before and the issue is the amperage delivered wirelessly doesn't support concurrent use the the phone with navigation and music playing and charging the battery.  

soaringthor says:

This is basically what I was waiting for before switching to the 928 from my 8X (keeping my 8X as an offline music player), but now I'm waiting for the 929 whether there's a dock or not.
I've used ProClip for four phones (DInc, Droid Maxx, HTC Trophy, HTC 8X) through three different cars and they have been so great. I highly recommend these mounts for anyone with a car!

Yeah, who screws something into their dashboard? Not all of us drive a bucket.

Sponge920 says:

Not all of us dismiss a product before actually doing our research. Nothing screws to your dash. It clips; hence, Proclip.

StevePT says:

Sam, does it say anywhere on the packaging where the ProClip mount is made? I noticed on the installation guide for the mount for my specific car that it was made in Sweden, but curious where the phone mount is made...

soaringthor says:

ProClip mounts are actually manufactured by Brodit in Sweden.  Apparently, if they give Brodit measurements, they can crank out a custom mount, because they don't use molds or anything, so they can just make whatever they want.
Source: ProClip About Us

Purian23 says:

Love having options for sure. I've been really debating on the CR-200 myself. But I'm also pretty heavily hoping for the Nokia 929 to be my next device and want to see if the 929 will retain wireless charging or not and if the new larger device will fit the CR-200!

Great articles here! Please considering changing the evermore "Sound off below" ending in each lol

gdinger says:

Snatched one up for the Avalanche today.... Now how do I disguise si my wife does not notice?????

Anyone know if the 1020 one will fit with the wireless charging case? I don't want to have to remove it when its docked to the car...

StevePT says:

There's a version on their site that is $5 more and says it is adjustable to fit 1020s w/ case.

SomeGuy11 says:

Eh. No wireless charging. Scouting the Nokia one on a deal.

TechAbstract says:

Where is the wireless car charger for Lumia phones? They need to make one. The wireless car charger from Nokia has horrible build quality. The plastic piece for the clamp will break apart in no time. Cheap plastic.